Today, with more and more applications of robots, almost all industries are considering using robots to replace human resources, including the welding industry. Robot welding is composed of robot body, control cabinet, teaching programmer and other main parts, but the robot also needs to be equipped with welding power supply, wire feeding device and welding gun device. Now with this article, let's understand the precautions of welding robot.

山東焊接專機

Shandong welding machine

當人們使用焊接機器人時，應該注意什么嗎?例如，選擇機器人焊接的安裝位置。機器人焊接包含許多高精度部件，尤其是它的控制柜。雖然防塵效果很好，但是安裝現場的惡劣環境會降低機器人的使用壽命。

When people use welding robot, what should they pay attention to? For example, choose the installation position of robot welding. Robot welding includes many high precision parts, especially its control cabinet. Although the dust-proof effect is very good, the harsh environment of the installation site will reduce the service life of the robot.

所謂，為了避免環境因素對機器人焊接的不利影響，延長其使用壽命，盡量將機器人焊接安裝在防水、干燥、灰塵少的地方?？刂乒窈秃笝C要求盡可能與地面保持距離。

In order to avoid the adverse effect of environmental factors on robot welding and extend its service life, the robot welding should be installed in the place with waterproof, dry and less dust. The control cabinet and welding machine shall be kept away from the ground as far as possible.

一般來說，機器人焊接在出廠前已經校準了其原點位置，但即使如此，在安裝機器人時，仍有必要測量位置并檢查工具位置。這一步相對簡單，只需在機器人焊接的設置中找到菜單，然后按照提示一步一步來。

Generally speaking, the robot welding has calibrated its origin position before leaving the factory, but even so, it is still necessary to measure the position and check the tool position when installing the robot. This step is relatively simple, just find the menu in the robot welding settings, and then follow the prompts step by step.

機器人焊接安裝完成后，其防護措施是必要的。用機器人本身代替人力的目的是為了快速地做一些重復性的動作，但是如果有人在運動過程中靠近，就有可能造成重大的事故。

After the welding and installation of robot, its safety protection measures are necessary. The purpose of using robot instead of human is to do some repetitive actions quickly, but if someone is close in the process of movement, it may cause major safety accidents.

因此，盡量在機器人焊接安裝外安裝圍欄，防止無關人員靠近;操作機器人焊接時，工作人員還應佩戴防護用品;啟動按鈕設置在機器人的位置，以避免留下隱患。

Therefore, the fence should be installed outside the welding installation of the robot as far as possible to prevent irrelevant personnel from approaching; when operating the robot welding, the staff should also wear protective equipment; the start button should be set in the safe position of the robot to avoid leaving safety hazards.

以上就是焊接機器人的使用事項了，不知道大家看完上文之后有沒有對此有更深入的了解了呢?隨著近幾年機器人的興起，提升了整體的工作量，而且焊接精度更高，如果您想了解更多的話，可以多多關注我們。

The above is the use of welding robot, I don't know if you have a deeper understanding after reading the above? With the rise of robots in recent years, the overall workload has been improved, and the welding accuracy is higher. If you want to know more, you can pay more attention to us.