好的設備必須好的保養，還請朋友們在采用中多多的留意對其的保養，只有這種才可以延長壽命，為高質量的焊接奠定基礎。下面山東自動焊接設備廠家為您講講自動焊接設備的操作以及維護內容。

Good equipment must be well maintained. Please pay more attention to its maintenance when using it. Only this can prolong its life and lay a foundation for high-quality welding. Next, Shandong automatic welding equipment manufacturer will tell you about the safe operation and maintenance of automatic welding equipment.

自動焊接設備的操作

Safe operation of automatic welding equipment

1.工作前仔細檢查工具，設備是不是完整，焊機接地是不是靠譜地接地，焊機的修理應由電器保養人員做好，別的人員不能拆修。

1. Before work, carefully check whether the tools and equipment are complete, and whether the welding machine is grounded reliably. The repair of the welding machine should be done by the electrical maintenance personnel, and other personnel should not dismantle and repair it.

2.工作前要仔細的檢查工作環境，確定為正常方可開始工作，工作前配戴好勞動防護用品。

2. Before work, carefully check the working environment and ensure that it is normal and safe before starting work. Wear labor protection articles before work.

3.高空焊接時要佩戴帶，帶記掛時，一定要避開焊接部位和地線部位，以防焊接時把帶燙斷。

3. The safety belt shall be worn when welding at heights. When the safety belt is hung, the welding part and ground wire must be avoided to prevent the safety belt from burning off during welding.

4.接地線要牢靠，禁止用腳手架、鋼絲纜繩、機床等作接地線。通常標準是焊接點的就近點，帶電設備放置地線一定要當心，不能把設備導線和地線連接，以防燒毀設備或發生火災。

4. The grounding wire shall be secure and safe. Scaffolds, wire ropes, machine tools, etc. are not allowed to be used as grounding wires. Generally, the standard is the nearest point of the welding point. Be careful when placing the ground wire of the live equipment. Do not connect the equipment wire with the ground wire to avoid burning the equipment or causing a fire.

自動焊接機如何維修保養

How to repair and maintain the automatic welding machine

1.再開始開機前行設備查驗，包含外型檢查和內部查驗。外部便是看是否有損壞或零件問題，如果有及時檢修解決，內部查驗包含電機、電路、控制裝置等的檢測。

1. Before starting the machine again, carry out equipment inspection, including appearance inspection and internal inspection. The external inspection is to check whether there is any damage or part problem. If it is timely repaired and solved, the internal inspection includes the detection of motor, circuit, control device, etc.

2.企業須具備合格的車間、機器、設備，如倉庫、熱處理設備、焊接設備和測試設備等。讓專門的人員做好使用解決。

2. The enterprise must have qualified workshops, machines and equipment, such as warehouses, heat treatment equipment, welding equipment and testing equipment. Let special personnel do a good job of using and solving.

3.當焊接導熱系數較高的金屬如銅、鋁及其合金時，應挑選熱輸入強度大、具備較高焊透能力的焊接方法，以便被焊金屬在短的時長內做到熔化狀態，并使工件變形小。

3. When welding metals with high thermal conductivity, such as copper, aluminum and their alloys, the welding method with high heat input strength and high penetration capacity shall be selected, so that the metal to be welded can be melted in a short time and the workpiece deformation is small.

此外在接拆電焊機電源線或電焊機發生故障時，應會同電工一起做好修理，嚴防觸電事故，為重。更多相關內容就來我們網站http://niuniury.com咨詢吧！

In addition, when connecting or removing the power line of the electric welding machine or the electric welding machine fails, repair it together with the electrician to prevent electric shock accidents. Safety is the most important. More relevant content will come to our website http://niuniury.com Consult!